The R-series Bobcat T76 is one of the latest and most comfortable skid steer models of the Bobcat family. However, several issues may arise over time with this top-performing track loader. Do you ever face any trouble with the 2020 Bobcat T76 machine?
Common Bobcat T76 problems are electrical issues, clogged air filters, track problems, etc. These issues mostly occur if you don’t care for the Bobcat T76 skid steers well or use it beyond its lifespan. You can bring it back to life by repairing or replacing the faulty parts. If you know the right tricks, you can fix most of the troubles at home.
This article will guide you to troubleshoot the Bobcat T76 with a proper rebuilding cost idea. Before that, let’s cover the specifications of the T76 Bobcat track loader.
Bobcat T76 track loader Specs & Technical Data
Some of the important Bobcat T76 specifications are-
| Rated operating capacity (ISO | 2,900 lb |
| Operating weight | 10,250 lb |
| Engine fuel | Diesel |
| Horsepower | 74 hp |
| Auxiliary std flow | 23.3 gal/min |
| Auxiliary high flow | 30.3 gal/min |
| Ground pressure (Rubber) | 6.2 psi |
| System relief @ quick couplers | 3,500 psi |
| Fuel tank capacity | 31.7 gal |
What are the Common Bobcat T76 Problems?
Bobcat T76 is the toughest and next-level skid steer loader. However, you could face some troubles here including-
- Electrical issue
- Clogged air filter
- Track issues
- Bad hydraulic fluid
- Engine power lacking
How to Fix T76 Bobcat Problems?
After talking about several issues with the T76 Bobcat skid steer, let’s have a discussion about troubleshooting these problems.
#1- Electrical Problems: Repair or Replace the Faulty Parts
Interrupting in the electrical system is a major issue of the T76 R-series Bobcat loader. This may happen due to many reasons like if the harness of the battery gets into contact with water, or malfunction of any other electrical part. Thus, the machine will face intermittent starting problems.
In this case, the backup alarm of the machine will go off and the buzzers will explode in the front. Even the panel mightn’t turn on. And in an extreme case, the machine won’t start. Don’t worry, some simple testing will help diagnose and fix the problem.
- Step 1: To check the harness, you have to disconnect the battery first. Before that, lift up the cab to access the battery and harness. Now you will see different connectors underneath the cabs that need to be checked one by one.
- Step 2: Start with the cab connector. You will see dielectric grease in the cab connector seal. If the seals and pins look healthy, the connector is considered well. If you see water in any connector, maybe the connector is bad.
- Step 3: Then go for the hub controller that has a boot around it. If the seals are good and there isn’t any moisture, it’s considered as good. The Hub controller is one of the prime parts that may get damaged by the water. If you see any issues, you can use electrical contact cleaner there to blow unnecessary particles out.
- Step 4: Now check the drive controller seals and pins. If there is dielectric grease in seals and no water in pins this is considered good.
- Step 5: After that test the work group controller that is actually a slap bullet controller. If the seal is okay, it indicates good health.
- Step 6: If you see anything wrong with the connectors underneath the cab, then go for the connectors inside of the panel or pillar for any water issues.
- Step 7: Monitor the contact points of the battery and harness. If you see corrosion in the contact ends remove rust from there. If there is any fault with the harness repair it.
- Step 8: In the worst case, the battery may be bad. If this happens replace the battery.
Depending upon the faults in the parts, you may spend $20 to $100 to repair or replace the damaged electrical parts.
The following table shows the different costs of the electrical parts of the T76 Bobcat skid loader.
| Parts Name | Parts Cost | Installing Cost | Total Cost |
|---|---|---|---|
| Battery Harness | $100 to $150 | $30 | $130 to $180 |
| Battery | $1000 to $1200 | $80 to $120 | $1080 to $3220 |
| Connectors | $10 to $30 | $10 to $20 | $20 to $50 |
#2- Clogged Air Filter: Clean or Replace Air Filter
The air filter plays an important role in the T76 Bobcat loader. It keeps the machine protected from dust, debris, and other particles. It’s necessary to clean the clogged dirt of the filter regularly, otherwise, this will damage the machine as well as the engine may experience intermittent starting. If you face such an issue, how to fix this? The steps are as below-
- Step 1: Remove the air filter. To do it, you need to take off the retaining cover and fasteners.
- Step 2: After removing the filter clean it well. Also, clean the filter chamber using a vacuum cleaner.
- Step 3: If the air filter is bad or damaged, replace it.
Cleaning or replacing the Bobcat T76 is an easy task. A new air filter is available for between 20 to 50 bucks.
The video below shows the cleaning process of the T76 Bobcat air filter.
#3- Track Issue: Setting and Tightening the Tracks
Like other Bobcat skid steers, sometimes the track of the T76 model mightn’t act rightly. Either it gets displaced or loosened. Both situations will be risky for the loader. But don’t worry, you can fix these easily by following the steps below.
- Step 1: Before you solve the issue, lift the problematic track using the bucket and put the wood plank on the backside of the machine.
- Step 2: After that loosen all the screws using a spanner or wrench.
- Step 3: For a displaced track, use a prybar or any other heavy material to bring back the track to the right position.
- Step 4: If the track is loosened, tighten the grease zerks using a grease gun. When you pump the grease gun the springs inside the zerks and hydraulic cylinders will be tightened. In this way, the track will be tightened easily.
The average price of the grease gun is around $20 to $50 which will help you tighten the loosening track. Usually, the track lasts longer. In case, the track of the T76 Bobcat gets damaged replace it soon. The average cost of the track replacement is $1500.
frequently asked questions (FAQs)
Maybe more questions may pop up in your mind regarding T76 Bobcat issues. Here we’ll give some of these questions and answers.
What to do, if the water pump of the Bobcat T76 gets damaged?
If it has a warranty, contact the dealer. In most cases, it’s repairable. Otherwise, you have to purchase a new pump.
Is Bobcat T76 service manual free?
No, it isn’t free yet. You have to pay almost $170 to get the T76 Bobcat service manual. Its part number is 7323984ENUSCD.
Final Thoughts
Bobcat T76 is a new arrival skid steer in the market that abolishes many shortcomings of the previous models. However, there are some issues with the T76 Bobcat track loader. If you face any troubles there, contact the dealer and read the service manual for solutions.
Here we’ve covered some of the Bobcat T76 problems that will help you solve these. And it’s important to care for and maintain the machine regularly to make it longer lasting and minimize these troubles.
Resources:
https://www.bobcat.com/na/en/equipment/loaders/compact-track-loaders/t76
Meet Emily, a true garden lover who has a passion for all things nature. With a deep understanding of plants and lawns, Emily’s love for gardening started at a young age, spending her summers tending to her grandparents’ garden.